Industrial Oil 1505 Hardwax

Artikelnummer:

Oxidierendes Industrieöl für Holzböden, das Öl und Wachs verbindet

  • Problemlos und flexibel in der Produktion
  • Extrem guter Holzschutz
  • Fabrikgefertigte Böden, einbaufertig
  • Keine zusätzliche Oberflächenbehandlung an der Baustelle erforderlich
  • In Farben nach Kundenwunsch erhältlich

10 L
20 L

Produktinformationen

  • Beschreibung
  • Spezifikationen
  • Technisches Datenblatt
  • Sicherheitsdatenblatt

VOC:

470 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.

Dichte:

0.95-1.00 g/ml.

Haltbarkeit:

3 Jahre

Ergiebigkeit:

30-40 m²/L

Farben:

Natur, Weiß 10%, Antik, Weiß 3%, Schwarz

Lagerung:

10-25°C. Für Kinder unzugänglich aufbewahren. Darf nicht erwärmt werden (z. B. Sonnenlicht). Im Winter frostfrei, im Sommer kühl lagern.

Verpackung:

10 L, 20 L

Viskosität:

70-75 Sek. DIN Cup 4

Festkörperanteil:

50-55%

Durchgehärtet:

7 tage bei 20°C.

Industrial Hardwax Oil 1505 ist ein schnell an der Luft trocknendes Hochleistungs-Holzfinish auf der Basis von natürlichem Pflanzenöl mit hoher Penetration. Das Hartwachsöl ist sehr gut zum Erlangen von herrlichem, haltbarem und glattem „Factory-finish” auf Holzböden, und bietet widerstandsfähigen, langlebigen Schutz und einen effektiven, flexiblen Anwendungsvorgang auf der Walzenauftragmaschine.

Arbeitsschritte

Instructions
Products in use
The wood must be clean, dry and free from dust.

Sanding
  • Final sanding grit 120-150
Roller
  • Use smooth rubber roller shore 15-25 natural rubber or nitrile rubber
  • Apply 20-25 gr/m2
  • Or manually
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
  • Or remove by cloth
Hot air oven
  • Temperature 35-40 °C and good ventilation
  • Or use stacking on racks
Stacking
  • 4-6 h by 20 °C
Intermediate sanding
  • Use sandingpaper grit 400-500
  • Optional
Roller
  • Apply 5 gr/m2
  • Apply 5-10 gr/m2
  • Or manually
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
  • Or remove excess oil by cloth
Hot air oven
  • Temperature 35-40 °C and good ventilation
  • Or use stacking on racks
Stacking
  • 12 h by 20 °C before packing
Viskositätskorrektur: Die Korrektur darf ausschließlich mit WOCA Solvent # 328575I erfolgen.